National Sales Service Hotline：
Ice machine has certain applications in many fields. There are some problems in the use of ice machine when you need to pay attention. Today, Xiaobian will introduce the precautions for using ice machine.
1. The ice machine should not be placed in an open air environment. It should be installed in a safe, clean and well ventilated environment, and should not be exposed to direct sunlight or rain.
2, the ice machine can not be close to the heat source, the use environment can not be lower than 5 ° C, not higher than 40 ° C, so as not to affect the heat dissipation of the condenser too high temperature, can not achieve a good ice making effect.
3, the ice machine should be installed on a stable platform, and adjust the anchor screw at the bottom of the machine to ensure the machine is placed horizontally, otherwise it will cause no ice and noise during operation. Space should be left around for heat dissipation.
4, the ice machine should use the specified independent power supply in line with national standards, the power supply should ensure reliable grounding, and equipped with fuses and leakage protection switches, etc., voltage fluctuations should not exceed ± 10% of the rated voltage.
5, the ice machine should use the water source in line with local drinking water standards, and install filters, etc., to remove impurities in the water, to avoid blocking the water pipe, pollute the water tank and ice mold and affect the ice making performance. The water temperature is lower by 2 °C, the higher is not more than 35 °C, the water pressure is lower than 0.02 Mpa, and the higher is 0.8 Mpa.
6. The ice machine must unscrew the inlet hose head for two months to clean the inlet valve screen to prevent the sand mud impurities from clogging the water inlet, which causes the water intake to become smaller, resulting in no ice. Generally, about six months, the ice water machine cleaning agent and disinfectant should be used to clean and disinfect the water distribution pipe, the water tank, the storage refrigerator and the water retaining plate, and rinse, and the ice generated during the cleaning process cannot be eaten.
7. When not in use for a long time, it should be cleaned, and the ice mold and the moisture in the box should be dried with a hair dryer, and placed in a place free of corrosive gas and ventilated and dry, to avoid open storage.
8. Care should be taken when handling the ice machine to prevent severe vibration. The handling inclination should not be less than 45 degrees. After long-distance transportation, the ice machine should be placed for 2-6 hours before the mechanism ice can be opened.
1. The ice machine should not be placed in an open air environment. It should be installed in a safe, clean and well ventilated environment, and should not be exposed to direct sunlight or rain.
2, the ice machine can not be close to the heat source, the use environment can not be lower than 5 ° C, not higher than 40 ° C, so as not to affect the heat dissipation of the condenser too high temperature, can not achieve a good ice making effect.
3, the ice machine should be installed on a stable platform, and adjust the anchor screw at the bottom of the machine to ensure the machine is placed horizontally, otherwise it will cause no ice and noise during operation. Space should be left around for heat dissipation.
4, the ice machine should use the specified independent power supply in line with national standards, the power supply should ensure reliable grounding, and equipped with fuses and leakage protection switches, etc., voltage fluctuations should not exceed ± 10% of the rated voltage.
5, the ice machine should use the water source in line with local drinking water standards, and install filters, etc., to remove impurities in the water, to avoid blocking the water pipe, pollute the water tank and ice mold and affect the ice making performance. The water temperature is lower by 2 °C, the higher is not more than 35 °C, the water pressure is lower than 0.02 Mpa, and the higher is 0.8 Mpa.
6. The ice machine must unscrew the inlet hose head for two months to clean the inlet valve screen to prevent the sand mud impurities from clogging the water inlet, which causes the water intake to become smaller, resulting in no ice. Generally, about six months, the ice water machine cleaning agent and disinfectant should be used to clean and disinfect the water distribution pipe, the water tank, the storage refrigerator and the water retaining plate, and rinse, and the ice generated during the cleaning process cannot be eaten.
7. When not in use for a long time, it should be cleaned, and the ice mold and the moisture in the box should be dried with a hair dryer, and placed in a place free of corrosive gas and ventilated and dry, to avoid open storage.
8. Care should be taken when handling the ice machine to prevent severe vibration. The handling inclination should not be less than 45 degrees. After long-distance transportation, the ice machine should be placed for 2-6 hours before the mechanism ice can be opened.
